Posts

, ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0066

COMMERCIAL - IRRIGATION

This project was built to deliver treated water for the irrigation system of one of the biggest and famous golf curses in Latin America

DESIGN PARAMETERS
WATER SOURCE
Seawater well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
395-450 ppm
FEED FLOW
64.0 GPM
PRODUCT FLOW
24.3 GPM
OPERATING PRESSURE
750 – 850 PSI
RECOVERY RATE
38%

Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 38% recovery.

We worked with a PX  as our go to Energy Recovery Device in this one. All of our system was mounted in an aluminum skid ready to ship in a 40′ container.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Three (3) FRP high rated pressure vessel with a four (4) membrane array each
  • Energy Recover Device (ERD) - Pressure Exchanger (PX)
  • Cleaning connections
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 16' x 4' x 6'
  • Weight: - lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0066

COMMERCIAL - IRRIGATION

This project was built to deliver treated water for the irrigation system of one of the biggest and famous golf curses in Latin America

DESIGN PARAMETERS
WATER SOURCE
Seawater well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
395-450 ppm
FEED FLOW
64.0 GPM
PRODUCT FLOW
24.3 GPM
OPERATING PRESSURE
750 – 850 PSI
RECOVERY RATE
38%

Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 38% recovery.

We worked with a PX  as our go to Energy Recovery Device in this one. All of our system was mounted in an aluminum skid ready to ship in a 40′ container.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Three (3) FRP high rated pressure vessel with a four (4) membrane array each
  • Energy Recover Device (ERD) - Pressure Exchanger (PX)
  • Cleaning connections
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 16' x 4' x 6'
  • Weight: - lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 3,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM - 3,000 GPD

SERIES: SWRO
Model: SSWRO-0004

INDUSTRIAL - DRINKING WATER

The four (4) systems supply water to living quarters exploration facility. Two of them on small towns supporting local population and others in the oil platform for drinking proporses of the exploration team

DESIGN PARAMETERS
WATER SOURCE
Brackish well, chlorine free
TEMPERATURE
20-28 °C
FEED TDS
<1,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
51.0 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
100-115 PSI
RECOVERY RATE
68%

Four (4) skid mounted seawater reverse osmosis systems set to produce 3,000 GPD of product water.

This system had one a pre-treatment system that consisted of one (1) multimedia filter, one (1) antiscalant injection pump and one (1) ultraviolet lamp for desinfection.

The RO system had three (3) pressure vessels with a single membrane array.

We also integrated a post-treatment system that had one (1) re-mineralization tank and a chlorine injection pump.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (3) FRP high rated pressure vessel with a one (1) membrane array each
  • Clean in place and flush system connections
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • One (1) multimedia FRP filters 12” diam. x 62” height (pre-treatment)
  • One (1) remineralization FRP filter 12” diam. X 62” height (post-treatment)
  • Two (2) activated carbon FRP filter 28” diam. X 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)
  • Chlorine injection system (post-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 65" x 73" x 36"
  • Weight: - lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

Containerized Solar Brackish Water Reverse Osmosis (RO) System

Ref: SOLAR SBWRO-0100C

ADVANCED Equipment and Services Inc. brings drinkable water to remote communities with water scarcity by delivering a containerized solar reverse osmosis system powered by solar panels with 100.000 GPD capacity.

The equipment provides drinkable water to about 6000 people, this state of the art technology in water treatment systems operates automatically 100% with solar energy reducing the operational cost substantially. It operates and self-regulate based on the instant solar radiation.

/0 Comments/by
, ,

PROJECT DESCRIPTION – BRACKISH WATER REVERSE OSMOSIS SYSTEM – 30,000 GPD


PROJECT DESCRIPTION
SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0060-Solar

INDUSTRIAL - ICE CREAM FACTORY

Supplying 70% of the icecream of an island in the caribbean. System provides water to icecream production.

DESIGN PARAMETERS
WATER SOURCE
Brackish well, chlorine free
TEMPERATURE
20-28 °C
FEED TDS
<1,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
51.0 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
100-115 PSI
RECOVERY RATE
68%

Advanced Equipment and Services has successfully completed commissioning and start-up of a state of the art 30,000 US GPD reverse osmosis system. This system has been design to work at 85% recovery rate with a very low working pressure. The final user is large a multinational company factory located in a small island were water and power are limited.

This system works 100% automatically with a permeate flushing system that will extend membrane operational life expand. Customer maintenance manager Luis Pena comment’s ” This system has been running with a very low operational cost and minimum maintenance we are very happy we got the right equipment from the right company”

Since the water is so scarce, the 15% reject flow coming out of the reverse osmosis system is used for flushing toilets in the factory general quarters, making this system a truly zero discharge equipment.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • High recovery system (85%) with low working pressure
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • High recovery system up to 85%
  • Permeate water flushing for optimal water quality
  • Two (2) multimedia FRP filters 28” diam. x 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by