PROJECT DESCRIPTION
DOUBLE PASS HIGH PURITY BRACKISH WATER RO SYSTEM 25,000 GPD

The Reverse Osmosis (RO) System provides a Robust construction and is designed with conservative standards for versatility in the event of feed water quality and temperature variations. The system design has incorporated a 15% allowable fouling or flux decline for the membranes without loss of system product water capacity. A pre and post cycle raw water membrane flush has been incorporated into the system design to minimize membrane fouling and piping corrosion during shutdown periods.


The Reverse Osmosis (RO) system includes the appropriate high pressure pump, FRP pressure vessels, spiral wound thin film composite RO membranes, Sch 80 PVC low pressure feed piping, and high pressure piping or hose. The RO unit provides as skid mounted, pre-assembled, pre-wired and is fully operationally tested at the factory prior to shipment.

All Advancees’s Reverse Osmosis (RO) systems includes PLC based controls and are capable of automatic operation with minimal operator intervention. Safety devices are provided to protect the RO system and its components from common fault conditions.

The RO feed water is split into two streams, permeate or purified water and concentrate or reject water. The RO permeate flows to the permeate water storage tank. The concentrate is disposed of in accordance with local environmental regulations or method of reuse. When the permeate storage tank is full the level switch sends the shutdown signal to the RO control panel and the system then begins it’s post-flush cycle which removes all concentrated contaminants from the system. Once complete, the system waits for the next start signal.

main features

WhatsApp
Email
Facebook
Twitter
LinkedIn
0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *