PROJECT DESCRIPTION SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM - 50,000 GPD
DRINKING WATER
This project was built to provide potable water for a town where electricity is minimal and water scarcity is a big issue
Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 68% recovery.
The pre-treatment system consisted of two (2) chemical injection pumps (chlorine and antiscalant) and three (3) media filters for removing suspended solids, iron and chlorine.
This system was designed to operate with solar energy and fit in a 20 ft ISO Container ready to ship, install and operate.
main features
- Inlet actuator valve
- 5 Micron FRP cartridge filter
- 5 HP multistage centrifugal High Pressure Pump
- Motor variable frequency driver (VFD)
- Low- and high-pressure protection
- Two (2)FRP high rated pressure vessel with a four (4) membrane array each
- Clean in place and flush system integrated
- NEMA 12 enclosure
- PLC controller
- 15” HMI for operator interface
- Product and reject flowmeter
- Conductivity monitor
- Sample valves
ANCILLARY EQUIPMENT
- Solar powered system
- 3HP SS well pump
- Two (2) multimedia FRP filters 28” diam. x 62” high (pre-treatment)
- Two (2) green sand FRP filter 29” diam. X 62” high for iron removal (pre-treatment)
- Two (2) activated carbon FRP filter 28” diam. X 62” high (pre-treatment)
- Chlorine injection system (pre-treatment)
- Antiscalant injection system (pre-treatment)
PHYSICAL DATA & DIMENSIONS :
- Dimensions: 20' ISO Container
- Weight: 16,900 lb.
related information
WhatsApp
Email
Facebook
Twitter
LinkedIn
ADVANCEES
ADVANCEES
ADVANCEES
Leave a Reply
Want to join the discussion?Feel free to contribute!