OUTPUT
26000
GPD
OUTPUT
94.6
M3D
PRODUCT
18.1
GPM
FEED
60.2
GPM
REJECT
42.1
GPM
RECOVERY
30
%
MSWRO-0026
OPTIONS AVAILABLE
SKID MOUNTED
SOLAR / HYBRID
SPECIFICATIONS
- 6 membranes 8"
- 30 HP stainless steel RO pump
- Weight: 1300 lbs. (591kg)
- Size: 170x38x67 inch. (431x97x170 cm)
- 2” feed connection
- 1.25” product connection
- 1.50” reject connection
Key Features
standard
- Membrane flux rate below 10 GFD to extend membrane life and minimize fouling.
- Reciprocating pumps with nickel aluminum bronze fluid end; sized at no more than 65% of the maximum rated RPM.
- Suction and discharge pulsation dampeners (non-corrosive) or a non-pulsating type pump (depending on capacity)
- Dual or triplex multi-media filtration sized for manual or automatic backwash of one while continuing system operation
- Cartridge filtration
- Automatic inlet feed valve
- Automatic feed water flush on startup
- Automatic product water flush on shutdown
- Conductivity monitor/controller driven product diverter valve to dump unacceptable water
- Permanently piped membrane cleaning system.
- PLC driven control panel
- Energy recovery system (Turbo or Pressure exchangers) based on customer need
- Passivation treatment of all welded SS316L, Super Duplex S.S. piping
- 15″ HMI for operator interface
- Digital flow meter and pressure transducers
- Nema 4X electrical equipment
- Remote control monitoring
- TEFC electric motors
- Compact footprint
optional equipment
- UV sterilization
- Green sand
- Iron removal
- Chlorination
- Dechlorination
- PH adjust
- MM filters ( sand, antracite, activate carbon )
- Ion exchanger
- Corrosion inhibitor
- Turbidity monitor