Posts

, , ,

PROJECT DESCRIPTION – SEA WATER REVERSE OSMOSIS SYSTEM – 12,000 GPD


PROJECT DESCRIPTION
SEA WATER REVERSE OSMOSIS SYSTEM - 12,000 GPD

SERIES: SWRO
Model: SSWRO-0015

COMMERCIAL - HOTEL

In a remote island in Central America, the system provides water to a small - state of the art - hotel

DESIGN PARAMETERS
WATER SOURCE
Well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 390 ppm
FEED FLOW
21.9 GPM
PRODUCT FLOW
8.3 GPM
OPERATING PRESSURE
727 PSI
RECOVERY RATE
38%

Single pass, single stage. One pressure vessel total, that contains 3 thin-film composite elements in series. The system produces 45.4 m3/day (12,000 GPD or 8.3 GPM) of product water at 38% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 25 HP positive displacement duplex SS High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 3HP SS well pump
  • 2 multimedia filters 20” diam. x 62” high (pre-treatment)
  • 2 activated carbon filter 20” diam. X 62” high (pre-treatment)
  • Chlorine injection system (pre-treatment)
  • Antiscalant injection system (pre-treatment)
  • Chlorine injection system (post-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , ,

PROJECT DESCRIPTION – SEA WATER REVERSE OSMOSIS SYSTEM – 12,000 GPD


PROJECT DESCRIPTION
SEA WATER REVERSE OSMOSIS SYSTEM - 12,000 GPD

SERIES: SWRO
Model: SSWRO-0015

COMMERCIAL - HOTEL

In a remote island in Central America, the system provides water to a small - state of the art - hotel

DESIGN PARAMETERS
WATER SOURCE
Well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 390 ppm
FEED FLOW
21.9 GPM
PRODUCT FLOW
8.3 GPM
OPERATING PRESSURE
727 PSI
RECOVERY RATE
38%

Single pass, single stage. One pressure vessel total, that contains 3 thin-film composite elements in series. The system produces 45.4 m3/day (12,000 GPD or 8.3 GPM) of product water at 38% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 25 HP positive displacement duplex SS High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 3HP SS well pump
  • 2 multimedia filters 20” diam. x 62” high (pre-treatment)
  • 2 activated carbon filter 20” diam. X 62” high (pre-treatment)
  • Chlorine injection system (pre-treatment)
  • Antiscalant injection system (pre-treatment)
  • Chlorine injection system (post-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 3,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM - 3,000 GPD

SERIES: SWRO
Model: SSWRO-0004

INDUSTRIAL - DRINKING WATER

The four (4) systems supply water to living quarters exploration facility. Two of them on small towns supporting local population and others in the oil platform for drinking proporses of the exploration team

DESIGN PARAMETERS
WATER SOURCE
Brackish well, chlorine free
TEMPERATURE
20-28 °C
FEED TDS
<1,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
51.0 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
100-115 PSI
RECOVERY RATE
68%

Four (4) skid mounted seawater reverse osmosis systems set to produce 3,000 GPD of product water.

This system had one a pre-treatment system that consisted of one (1) multimedia filter, one (1) antiscalant injection pump and one (1) ultraviolet lamp for desinfection.

The RO system had three (3) pressure vessels with a single membrane array.

We also integrated a post-treatment system that had one (1) re-mineralization tank and a chlorine injection pump.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (3) FRP high rated pressure vessel with a one (1) membrane array each
  • Clean in place and flush system connections
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • One (1) multimedia FRP filters 12” diam. x 62” height (pre-treatment)
  • One (1) remineralization FRP filter 12” diam. X 62” height (post-treatment)
  • Two (2) activated carbon FRP filter 28” diam. X 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)
  • Chlorine injection system (post-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 65" x 73" x 36"
  • Weight: - lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by