Posts

, , , ,

PROJECT DESCRIPTION – MOBILE RO WATER DIALYSIS SYSTEM


PROJECT DESCRIPTION
MOBILE RO DIALYSIS WATER TREATMENT SYSTEMS - 576 GPD

SERIES: DIALYSIS RO
Model: MOBILE

Easy to transport Mobile RO Dialysis Water treatment Unit provides the required flexibility for integration into hospital and home needs. The system it’s set to produce 0.4 US Gal/minute of product water at 20% recovery.

Water pre-treatment included. It consists of sediment and activated carbon filters to remove suspended solids and residual chlorine from incoming feed water.

 

Here more info on Dialysis RO Mobile

main features

  • Monitoring screen helps to assure water product meets the require standard before and during dialysis operation
  • Emergency protection, in case of high salinity feed water or low-pressure system will react accordingly and provide message to operator
  • Provides a permeate capacity of 90 l/h
  • Automatic rinse cycles, helping to preserve water quality under control
  • Easy interphase with operator facilitates system operation
  • Water pretreatment included
  • Feed and permeate Water Conductivity are display for customer peace of mind making sure water meets quality standard
  • Pressure switch protects system in case of unexpected shutoff feed water supply

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 36" x 24" x 12"
  • Weight: 65 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SEAWATER DESALINATION REVERSE OSMOSIS SYSTEM – 100,000 GPD


PROJECT DESCRIPTION
SEA WATER REVERSE OSMOSIS SYSTEM - 100,000 GPD

SERIES: SWRO
Model: MSWRO-0106 CONTAINERIZED

DRINKING WATER - MUNICIPALITY

This project was built to deliver treated water for needed communities (approx. 3,200 people) where the municipal water service is deficient.

For this project we delivered two (4) containerized sea water reverse osmosis systems, complete with pre-treatment, flush and post- treatment modules.

Each SWRO had a single pass, single stage, four (4) pressure vessel total, that contained twenty four (24) thin-film composite elements.

The system produces 100,000 GPD or 69.5.0 GPM of product water at 45% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 75 HP multistage centrifugal High Pressure Pump
  • Energy Recover Device (ERD) - Turbo charger
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 7.5HP centrifugal feed pump
  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , ,

PROJECT DESCRIPTION – BRACKISH WATER REVERSE OSMOSIS SYSTEM – 65,000 GPD


PROJECT DESCRIPTION
BRACKISH WATER REVERSE OSMOSIS SYSTEM - 65,000 GPD

SERIES: BWRO
Model: MBWRO-0090

Industrial - irrigation

This project was built to deliver treated water to irrigate a golf course

Single pass, single stage. Four (4) pressure vessel total, that contains twenty (20) LG NanoH2O membranes. The system it’s set to produce 65,000 US Gal/day of product water at 45% recovery.

This system was designed to  be shipped and transported in an anodized aluminum skid.

​

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 30 HP multistage centrifual High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a five (5) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 15' x 6' x 6'
  • Weight: 4,200 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 100,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM 100,000 GPD

SERIES: SWRO
Model: MSWRO-0106

DRINKING WATER

This project was built to deliver treated water for needed communities (approx. 4,000 people) where the municipal water service is deficient.

For this project we delivered four (4) containerized sea water reverse osmosis systems, complete with pre-treatment, flush and post- treatment modules.

Each SWRO had a single pass, single stage, four (4) pressure vessel total, that contained twenty four (24) thin-film composite elements.

The system produces 100,000 GPD or 69.5.0 GPM of product water at 45% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 75 HP multistage centrifugal High Pressure Pump
  • Energy Recover Device (ERD) - Turbo charger
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 7.5HP centrifugal feed pump
  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0060-Solar

DRINKING WATER

This project was built to provide potable water for a town where electricity is minimal and water scarcity is a big issue

Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 68% recovery.

The pre-treatment system consisted of two (2) chemical injection pumps (chlorine and antiscalant) and three (3) media filters for removing suspended solids, iron and chlorine.

This system was designed to operate with solar energy and fit in a 20 ft ISO Container ready to ship, install and operate.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (2)FRP high rated pressure vessel with a four (4) membrane array each
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • Solar powered system
  • 3HP SS well pump
  • Two (2) multimedia FRP filters 28” diam. x 62” high (pre-treatment)
  • Two (2) green sand FRP filter 29” diam. X 62” high for iron removal (pre-treatment)
  • Two (2) activated carbon FRP filter 28” diam. X 62” high (pre-treatment)
  • Chlorine injection system (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 20' ISO Container
  • Weight: 16,900 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , ,

PROJECT DESCRIPTION – SEA WATER REVERSE OSMOSIS SYSTEM – 12,000 GPD


PROJECT DESCRIPTION
SEA WATER REVERSE OSMOSIS SYSTEM - 12,000 GPD

SERIES: SWRO
Model: SSWRO-0015

COMMERCIAL - HOTEL

In a remote island in Central America, the system provides water to a small - state of the art - hotel

Single pass, single stage. One pressure vessel total, that contains 3 thin-film composite elements in series. The system produces 45.4 m3/day (12,000 GPD or 8.3 GPM) of product water at 38% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 25 HP positive displacement duplex SS High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 3HP SS well pump
  • 2 multimedia filters 20” diam. x 62” high (pre-treatment)
  • 2 activated carbon filter 20” diam. X 62” high (pre-treatment)
  • Chlorine injection system (pre-treatment)
  • Antiscalant injection system (pre-treatment)
  • Chlorine injection system (post-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 65,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM
65,000 GPD

SERIES: SWRO
Model: MSWRO-0066

COMMERCIAL - IRRIGATION

This project was built to deliver treated water for an irrigation system in a farm

Single pass, single stage. Three (3) pressure vessel total, that contains twelve (12) LG NanoH2O membranes. The system it’s set to produce 65,000 US Gal/day of product water at 45% recovery.

The pre-treatment system consisted six (6) media filters for removing suspended solids.

This system was designed to  be shipped and transported in a aluminum skid.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 20 HP positive displacement duplex SS High Pressure Pump
  • Energy Recovery Device (ERD) - Pressure exchanger
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a four (3) membrane array each
  • Clean in place and flush system integrated with a 5HP SS multistage centrifugal pump and a 160 gal polyethylene tank
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 5HP SS centrifugal feed pump
  • Six (6) multimedia filters 48” diam. x 62” high (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 15' x 6' x 7'
  • Weight: 14,200 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/1 Comment/by
, ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0066

COMMERCIAL - IRRIGATION

This project was built to deliver treated water for the irrigation system of one of the biggest and famous golf curses in Latin America

Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 38% recovery.

We worked with a PX  as our go to Energy Recovery Device in this one. All of our system was mounted in an aluminum skid ready to ship in a 40′ container.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Three (3) FRP high rated pressure vessel with a four (4) membrane array each
  • Energy Recover Device (ERD) - Pressure Exchanger (PX)
  • Cleaning connections
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 16' x 4' x 6'
  • Weight: - lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – CONTAINERIZED BRACKISH WATER REVERSE OSMOSIS SYSTEM – 216,000 GPD


PROJECT DESCRIPTION
CONTAINERIZED BRACKISH WATER REVERSE OSMOSIS SYSTEM - 216,000 GPD

SERIES: BWRO
Model: LBWRO-0220-Containerized

COMMERCIAL - AIRPORT

This system provides drinkable water to one of the biggest airports in Latin America

216,000 GPD Containerized Brackish Water Reverse Osmosis System mounted in a standard ISO 40′ container hydrotested and functionally tested.

The membrane array, recovery rate and flux rate are designed to produce level TDS water < 250 for at least 3 years. Chloride level will be below 200 PPM.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 50 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Five (5)FRP high rated pressure vessel with a seven (7) membrane array each
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 40' ISO Container
  • Weight: - lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 3,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM - 3,000 GPD

SERIES: SWRO
Model: SSWRO-0004

INDUSTRIAL - DRINKING WATER

The four (4) systems supply water to living quarters exploration facility. Two of them on small towns supporting local population and others in the oil platform for drinking proporses of the exploration team

Four (4) skid mounted seawater reverse osmosis systems set to produce 3,000 GPD of product water.

This system had one a pre-treatment system that consisted of one (1) multimedia filter, one (1) antiscalant injection pump and one (1) ultraviolet lamp for desinfection.

The RO system had three (3) pressure vessels with a single membrane array.

We also integrated a post-treatment system that had one (1) re-mineralization tank and a chlorine injection pump.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (3) FRP high rated pressure vessel with a one (1) membrane array each
  • Clean in place and flush system connections
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • One (1) multimedia FRP filters 12” diam. x 62” height (pre-treatment)
  • One (1) remineralization FRP filter 12” diam. X 62” height (post-treatment)
  • Two (2) activated carbon FRP filter 28” diam. X 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)
  • Chlorine injection system (post-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 65" x 73" x 36"
  • Weight: - lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by