Posts

, , , ,

PROJECT DESCRIPTION – CONTAINERIZED SEAWATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SEAWATER CONTAINERIZED REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: SWRO
Model: MSWRO-0050C

DRINKING WATER - MUNICIPALITY

This project was built to deliver treated water for all amenities (showers, kitchen, pools, restaurants and waterpark) in a 500 rooms hotel in a remote island.

DESIGN PARAMETERS
WATER SOURCE
Sea water well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
77.2 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
848 PSI
RECOVERY RATE
45%

Single pass, single stage. Two pressure vessel total, that contains twelve (12) thin film membranes. The system it’s set to produce 50,000 US Gal/day of product water at 45% recovery.

The pre-treatment system consisted of four (4) media filters for removing suspended solids, iron and chlorine.

This containerized seawater desalination system was designed to fit and operate in a 20 ft ISO Container ready to ship and install.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (2) FRP high rated pressure vessel with four (4) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • 20' ISO Container
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SEAWATER DESALINATION REVERSE OSMOSIS SYSTEM – 100,000 GPD


PROJECT DESCRIPTION
SEA WATER REVERSE OSMOSIS SYSTEM - 100,000 GPD

SERIES: SWRO
Model: MSWRO-0106 CONTAINERIZED

DRINKING WATER - MUNICIPALITY

This project was built to deliver treated water for needed communities (approx. 3,200 people) where the municipal water service is deficient.

DESIGN PARAMETERS
WATER SOURCE
Sea water well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 390 ppm
FEED FLOW
154.2 GPM
PRODUCT FLOW
69.5 GPM
OPERATING PRESSURE
821 PSI
RECOVERY RATE
45%

For this project we delivered two (4) containerized sea water reverse osmosis systems, complete with pre-treatment, flush and post- treatment modules.

Each SWRO had a single pass, single stage, four (4) pressure vessel total, that contained twenty four (24) thin-film composite elements.

The system produces 100,000 GPD or 69.5.0 GPM of product water at 45% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 75 HP multistage centrifugal High Pressure Pump
  • Energy Recover Device (ERD) - Turbo charger
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 7.5HP centrifugal feed pump
  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 100,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM 100,000 GPD

SERIES: SWRO
Model: MSWRO-0106

DRINKING WATER

This project was built to deliver treated water for needed communities (approx. 4,000 people) where the municipal water service is deficient.

DESIGN PARAMETERS
WATER SOURCE
Sea water well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 390 ppm
FEED FLOW
154.2 GPM
PRODUCT FLOW
69.5 GPM
OPERATING PRESSURE
821 PSI
RECOVERY RATE
45%

For this project we delivered four (4) containerized sea water reverse osmosis systems, complete with pre-treatment, flush and post- treatment modules.

Each SWRO had a single pass, single stage, four (4) pressure vessel total, that contained twenty four (24) thin-film composite elements.

The system produces 100,000 GPD or 69.5.0 GPM of product water at 45% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 75 HP multistage centrifugal High Pressure Pump
  • Energy Recover Device (ERD) - Turbo charger
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 7.5HP centrifugal feed pump
  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0066

COMMERCIAL - IRRIGATION

This project was built to deliver treated water for the irrigation system of one of the biggest and famous golf curses in Latin America

DESIGN PARAMETERS
WATER SOURCE
Seawater well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
395-450 ppm
FEED FLOW
64.0 GPM
PRODUCT FLOW
24.3 GPM
OPERATING PRESSURE
750 – 850 PSI
RECOVERY RATE
38%

Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 38% recovery.

We worked with a PX  as our go to Energy Recovery Device in this one. All of our system was mounted in an aluminum skid ready to ship in a 40′ container.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Three (3) FRP high rated pressure vessel with a four (4) membrane array each
  • Energy Recover Device (ERD) - Pressure Exchanger (PX)
  • Cleaning connections
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 16' x 4' x 6'
  • Weight: - lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – CONTAINERIZED SEAWATER REVERSE OSMOSIS – 50,000 GPD


PROJECT DESCRIPTION
SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: SWRO
Model: MSWRO-0066

COMMERCIAL - HOTEL

This system provides water for all amenities in a hotel of 350 rooms in the caribbean

DESIGN PARAMETERS
WATER SOURCE
Seawater well, chlorine free
TEMPERATURE
20-28 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
115.0 GPM
PRODUCT FLOW
46.0 GPM
OPERATING PRESSURE
750 – 850 PSI
RECOVERY RATE
40%

Single pass, single stage. Two pressure vessel total, that contains twelve (12) LG NanoH2O membranes. The system it’s set to produce 30,000 US Gal/day of product water at 40% recovery.

The pre-treatment system consisted of two (2) chemical injection pumps (chlorine and antiscalant) and two (2) media filters for removing suspended solids, iron and chlorine.

This system was designed to operate and fit in a 20 ft ISO Container ready to ship and isntall.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (2) FRP high rated pressure vessel with a six (6) membrane array each
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 7.5HP centrifugal SS feed pump
  • Two (2) multimedia FRP filters 42” diam. x 62” high (pre-treatment)
  • Chlorine injection system (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 20' ISO Container
  • Weight: 16,900 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by