Posts

, , , ,

PROJECT DESCRIPTION – SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0060-Solar

DRINKING WATER

This project was built to provide potable water for a town where electricity is minimal and water scarcity is a big issue

DESIGN PARAMETERS
WATER SOURCE
Brackish well, chlorine free
TEMPERATURE
20-28 °C
FEED TDS
<1,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
51.0 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
100-115 PSI
RECOVERY RATE
68%

Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 68% recovery.

The pre-treatment system consisted of two (2) chemical injection pumps (chlorine and antiscalant) and three (3) media filters for removing suspended solids, iron and chlorine.

This system was designed to operate with solar energy and fit in a 20 ft ISO Container ready to ship, install and operate.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (2)FRP high rated pressure vessel with a four (4) membrane array each
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • Solar powered system
  • 3HP SS well pump
  • Two (2) multimedia FRP filters 28” diam. x 62” high (pre-treatment)
  • Two (2) green sand FRP filter 29” diam. X 62” high for iron removal (pre-treatment)
  • Two (2) activated carbon FRP filter 28” diam. X 62” high (pre-treatment)
  • Chlorine injection system (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 20' ISO Container
  • Weight: 16,900 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0060-Solar

DRINKING WATER

This project was built to provide potable water for a town where electricity is minimal and water scarcity is a big issue

DESIGN PARAMETERS
WATER SOURCE
Brackish well, chlorine free
TEMPERATURE
20-28 °C
FEED TDS
<1,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
51.0 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
100-115 PSI
RECOVERY RATE
68%

Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 68% recovery.

The pre-treatment system consisted of two (2) chemical injection pumps (chlorine and antiscalant) and three (3) media filters for removing suspended solids, iron and chlorine.

This system was designed to operate with solar energy and fit in a 20 ft ISO Container ready to ship, install and operate.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (2)FRP high rated pressure vessel with a four (4) membrane array each
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • Solar powered system
  • 3HP SS well pump
  • Two (2) multimedia FRP filters 28” diam. x 62” high (pre-treatment)
  • Two (2) green sand FRP filter 29” diam. X 62” high for iron removal (pre-treatment)
  • Two (2) activated carbon FRP filter 28” diam. X 62” high (pre-treatment)
  • Chlorine injection system (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 20' ISO Container
  • Weight: 16,900 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, ,

PROJECT DESCRIPTION – BRACKISH WATER REVERSE OSMOSIS SYSTEM – 30,000 GPD


PROJECT DESCRIPTION
SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0060-Solar

INDUSTRIAL - ICE CREAM FACTORY

Supplying 70% of the icecream of an island in the caribbean. System provides water to icecream production.

DESIGN PARAMETERS
WATER SOURCE
Brackish well, chlorine free
TEMPERATURE
20-28 °C
FEED TDS
<1,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
51.0 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
100-115 PSI
RECOVERY RATE
68%

Advanced Equipment and Services has successfully completed commissioning and start-up of a state of the art 30,000 US GPD reverse osmosis system. This system has been design to work at 85% recovery rate with a very low working pressure. The final user is large a multinational company factory located in a small island were water and power are limited.

This system works 100% automatically with a permeate flushing system that will extend membrane operational life expand. Customer maintenance manager Luis Pena comment’s ” This system has been running with a very low operational cost and minimum maintenance we are very happy we got the right equipment from the right company”

Since the water is so scarce, the 15% reject flow coming out of the reverse osmosis system is used for flushing toilets in the factory general quarters, making this system a truly zero discharge equipment.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • High recovery system (85%) with low working pressure
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • High recovery system up to 85%
  • Permeate water flushing for optimal water quality
  • Two (2) multimedia FRP filters 28” diam. x 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by