Posts

, , , ,

PROJECT DESCRIPTION – CONTAINERIZED SEAWATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SEAWATER CONTAINERIZED REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: SWRO
Model: MSWRO-0050C

DRINKING WATER - MUNICIPALITY

This project was built to deliver treated water for all amenities (showers, kitchen, pools, restaurants and waterpark) in a 500 rooms hotel in a remote island.

DESIGN PARAMETERS
WATER SOURCE
Sea water well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
77.2 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
848 PSI
RECOVERY RATE
45%

Single pass, single stage. Two pressure vessel total, that contains twelve (12) thin film membranes. The system it’s set to produce 50,000 US Gal/day of product water at 45% recovery.

The pre-treatment system consisted of four (4) media filters for removing suspended solids, iron and chlorine.

This containerized seawater desalination system was designed to fit and operate in a 20 ft ISO Container ready to ship and install.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (2) FRP high rated pressure vessel with four (4) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • 20' ISO Container
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – CONTAINERIZED SEAWATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SEAWATER CONTAINERIZED REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: SWRO
Model: MSWRO-0050C

DRINKING WATER - MUNICIPALITY

This project was built to deliver treated water for all amenities (showers, kitchen, pools, restaurants and waterpark) in a 500 rooms hotel in a remote island.

DESIGN PARAMETERS
WATER SOURCE
Sea water well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
77.2 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
848 PSI
RECOVERY RATE
45%

Single pass, single stage. Two pressure vessel total, that contains twelve (12) thin film membranes. The system it’s set to produce 50,000 US Gal/day of product water at 45% recovery.

The pre-treatment system consisted of four (4) media filters for removing suspended solids, iron and chlorine.

This containerized seawater desalination system was designed to fit and operate in a 20 ft ISO Container ready to ship and install.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (2) FRP high rated pressure vessel with four (4) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • 20' ISO Container
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SEAWATER DESALINATION REVERSE OSMOSIS SYSTEM – 100,000 GPD


PROJECT DESCRIPTION
SEA WATER REVERSE OSMOSIS SYSTEM - 100,000 GPD

SERIES: SWRO
Model: MSWRO-0106 CONTAINERIZED

DRINKING WATER - MUNICIPALITY

This project was built to deliver treated water for needed communities (approx. 3,200 people) where the municipal water service is deficient.

DESIGN PARAMETERS
WATER SOURCE
Sea water well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 390 ppm
FEED FLOW
154.2 GPM
PRODUCT FLOW
69.5 GPM
OPERATING PRESSURE
821 PSI
RECOVERY RATE
45%

For this project we delivered two (4) containerized sea water reverse osmosis systems, complete with pre-treatment, flush and post- treatment modules.

Each SWRO had a single pass, single stage, four (4) pressure vessel total, that contained twenty four (24) thin-film composite elements.

The system produces 100,000 GPD or 69.5.0 GPM of product water at 45% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 75 HP multistage centrifugal High Pressure Pump
  • Energy Recover Device (ERD) - Turbo charger
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 7.5HP centrifugal feed pump
  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 400,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM - 400,000 GPD

SERIES: SWRO
Model: LSWRO-0500

DRINKING WATER - MUNICIPALITY

This project was built to deliver treated water for needed communities (approx. 12,000) where the municipal water service is deficient.

DESIGN PARAMETERS
WATER SOURCE
Seawater well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 390 ppm
FEED FLOW
617.0 GPM
PRODUCT FLOW
277.0 GPM
OPERATING PRESSURE
917 PSI
RECOVERY RATE
45%

For this project we delivered four (4) containerized seawater reverse osmosis systems, complete with pre-treatment, flush and post- treatment modules. Each system was installed and shipped in two (2) 40ft container.

Each SWRO had a single pass, single stage, fourteen (14) pressure vessel total, that contained ninety eight (98) thin-film composite elements.

The system produces 400,000 GPD or 277.0.0 GPM of product water at 45% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 300 HP multistage centrifugal High Pressure Pump
  • Energy Recovery Device (ERD) - Turbo charger
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a seven (7) membrane array
  • Clean in place and flush system integrated, 25HP SS multistage centrifugal pump and a 800gal polyethilene tank
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 25HP centrifugal feed pump
  • Six (6) multimedia filters 68” diam. x 72” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 40' container
  • Weight: 16,000 lbs (aprox)

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SEAWATER REVERSE OSMOSIS SYSTEM – 100,000 GPD


PROJECT DESCRIPTION
SEAWATER REVERSE OSMOSIS SYSTEM 100,000 GPD

SERIES: SWRO
Model: MSWRO-0106

DRINKING WATER

This project was built to deliver treated water for needed communities (approx. 4,000 people) where the municipal water service is deficient.

DESIGN PARAMETERS
WATER SOURCE
Sea water well, chlorine free
TEMPERATURE
25 °C
FEED TDS
25,500 – 36,000 ppm
PRODUCT TDS
< 390 ppm
FEED FLOW
154.2 GPM
PRODUCT FLOW
69.5 GPM
OPERATING PRESSURE
821 PSI
RECOVERY RATE
45%

For this project we delivered four (4) containerized sea water reverse osmosis systems, complete with pre-treatment, flush and post- treatment modules.

Each SWRO had a single pass, single stage, four (4) pressure vessel total, that contained twenty four (24) thin-film composite elements.

The system produces 100,000 GPD or 69.5.0 GPM of product water at 45% recovery.

main features

  • Inlet actuator valve
  • 5 Micron cartridge filter
  • 75 HP multistage centrifugal High Pressure Pump
  • Energy Recover Device (ERD) - Turbo charger
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • FRP high rated pressure vessel with a three (3) membrane array
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • 7.5HP centrifugal feed pump
  • 4 multimedia filters 48” diam. x 62” high (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 10' x 4' x 6'
  • Weight: 1,050 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by
, , , ,

PROJECT DESCRIPTION – SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM – 50,000 GPD


PROJECT DESCRIPTION
SOLAR BRACKISH WATER REVERSE OSMOSIS SYSTEM - 50,000 GPD

SERIES: BWRO
Model: MBWRO-0060-Solar

DRINKING WATER

This project was built to provide potable water for a town where electricity is minimal and water scarcity is a big issue

DESIGN PARAMETERS
WATER SOURCE
Brackish well, chlorine free
TEMPERATURE
20-28 °C
FEED TDS
<1,000 ppm
PRODUCT TDS
< 300 ppm
FEED FLOW
51.0 GPM
PRODUCT FLOW
34.7 GPM
OPERATING PRESSURE
100-115 PSI
RECOVERY RATE
68%

Single pass, single stage. Two pressure vessel total, that contains eight (8) LG NanoH2O membranes. The system it’s set to produce 50,000 US Gal/day of product water at 68% recovery.

The pre-treatment system consisted of two (2) chemical injection pumps (chlorine and antiscalant) and three (3) media filters for removing suspended solids, iron and chlorine.

This system was designed to operate with solar energy and fit in a 20 ft ISO Container ready to ship, install and operate.

main features

  • Inlet actuator valve
  • 5 Micron FRP cartridge filter
  • 5 HP multistage centrifugal High Pressure Pump
  • Motor variable frequency driver (VFD)
  • Low- and high-pressure protection
  • Two (2)FRP high rated pressure vessel with a four (4) membrane array each
  • Clean in place and flush system integrated
  • NEMA 12 enclosure
  • PLC controller
  • 15” HMI for operator interface
  • Product and reject flowmeter
  • Conductivity monitor
  • Sample valves

ANCILLARY EQUIPMENT

  • Solar powered system
  • 3HP SS well pump
  • Two (2) multimedia FRP filters 28” diam. x 62” high (pre-treatment)
  • Two (2) green sand FRP filter 29” diam. X 62” high for iron removal (pre-treatment)
  • Two (2) activated carbon FRP filter 28” diam. X 62” high (pre-treatment)
  • Chlorine injection system (pre-treatment)
  • Antiscalant injection system (pre-treatment)

PHYSICAL DATA & DIMENSIONS :

  • Dimensions: 20' ISO Container
  • Weight: 16,900 lb.

related information

APPLICATIONS
INDUSTRIES
PRODUCTS
WhatsApp
Email
Facebook
Twitter
LinkedIn
/0 Comments/by