PROJECT DESCRIPTION SEA WATER REVERSE OSMOSIS SYSTEM - 100,000 GPD
DRINKING WATER - MUNICIPALITY
This project was built to deliver treated water for needed communities (approx. 3,200 people) where the municipal water service is deficient.
| DESIGN PARAMETERS | |
|---|---|
|
WATER SOURCE |
Sea water well, chlorine free |
|
TEMPERATURE |
25 °C |
|
FEED TDS |
25,500 – 36,000 ppm |
|
PRODUCT TDS |
< 390 ppm |
|
FEED FLOW |
154.2 GPM |
|
PRODUCT FLOW |
69.5 GPM |
|
OPERATING PRESSURE |
821 PSI |
|
RECOVERY RATE |
45% |
For this project we delivered two (4) containerized sea water reverse osmosis systems, complete with pre-treatment, flush and post- treatment modules.
Each SWRO had a single pass, single stage, four (4) pressure vessel total, that contained twenty four (24) thin-film composite elements.
The system produces 100,000 GPD or 69.5.0 GPM of product water at 45% recovery.
main features
- Inlet actuator valve
- 5 Micron cartridge filter
- 75 HP multistage centrifugal High Pressure Pump
- Energy Recover Device (ERD) - Turbo charger
- Motor variable frequency driver (VFD)
- Low- and high-pressure protection
- FRP high rated pressure vessel with a three (3) membrane array
- Clean in place and flush system integrated
- NEMA 12 enclosure
- PLC controller
- 15” HMI for operator interface
- Product and reject flowmeter
- Conductivity monitor
- Sample valves
ANCILLARY EQUIPMENT
- 7.5HP centrifugal feed pump
- 4 multimedia filters 48” diam. x 62” high (pre-treatment)
- Antiscalant injection system (pre-treatment)
PHYSICAL DATA & DIMENSIONS :
- Dimensions: 10' x 4' x 6'
- Weight: 1,050 lb.
related information
WhatsApp
Email
Facebook
Twitter
LinkedIn
ADVANCEES
ADVANCEES
ADVANCEES