PROJECT DESCRIPTION
SEAWATER CONTAINERIZED REVERSE OSMOSIS SYSTEM - 50,000 GPD
DRINKING WATER - MUNICIPALITY
This project was built to deliver treated water for all amenities (showers, kitchen, pools, restaurants and waterpark) in a 500 rooms hotel in a remote island.
| DESIGN PARAMETERS | |
|---|---|
|
WATER SOURCE |
Sea water well, chlorine free |
|
TEMPERATURE |
25 °C |
|
FEED TDS |
25,500 – 36,000 ppm |
|
PRODUCT TDS |
< 300 ppm |
|
FEED FLOW |
77.2 GPM |
|
PRODUCT FLOW |
34.7 GPM |
|
OPERATING PRESSURE |
848 PSI |
|
RECOVERY RATE |
45% |
Single pass, single stage. Two pressure vessel total, that contains twelve (12) thin film membranes. The system it’s set to produce 50,000 US Gal/day of product water at 45% recovery.
The pre-treatment system consisted of four (4) media filters for removing suspended solids, iron and chlorine.
This containerized seawater desalination system was designed to fit and operate in a 20 ft ISO Container ready to ship and install.
main features
- Inlet actuator valve
- 5 Micron cartridge filter
- 5 HP multistage centrifugal High Pressure Pump
- Motor variable frequency driver (VFD)
- Low- and high-pressure protection
- Two (2) FRP high rated pressure vessel with four (4) membrane array
- Clean in place and flush system integrated
- NEMA 12 enclosure
- PLC controller
- 15” HMI for operator interface
- Product and reject flowmeter
- Conductivity monitor
- Sample valves
ANCILLARY EQUIPMENT
- 4 multimedia filters 48” diam. x 62” high (pre-treatment)
PHYSICAL DATA & DIMENSIONS :
- 20' ISO Container
- Weight: 1,050 lb.
related information
WhatsApp
Email
Facebook
Twitter
LinkedIn
ADVANCEES
ADVANCEES
ADVANCEES