Here we post about applications of our products


PROJECT DESCRIPTION
DOUBLE PASS HIGH PURITY BRACKISH WATER RO SYSTEM 25,000 GPD

The Reverse Osmosis (RO) System provides a Robust construction and is designed with conservative standards for versatility in the event of feed water quality and temperature variations. The system design has incorporated a 15% allowable fouling or flux decline for the membranes without loss of system product water capacity. A pre and post cycle raw water membrane flush has been incorporated into the system design to minimize membrane fouling and piping corrosion during shutdown periods.


The Reverse Osmosis (RO) system includes the appropriate high pressure pump, FRP pressure vessels, spiral wound thin film composite RO membranes, Sch 80 PVC low pressure feed piping, and high pressure piping or hose. The RO unit provides as skid mounted, pre-assembled, pre-wired and is fully operationally tested at the factory prior to shipment.

All Advancees’s Reverse Osmosis (RO) systems includes PLC based controls and are capable of automatic operation with minimal operator intervention. Safety devices are provided to protect the RO system and its components from common fault conditions.

The RO feed water is split into two streams, permeate or purified water and concentrate or reject water. The RO permeate flows to the permeate water storage tank. The concentrate is disposed of in accordance with local environmental regulations or method of reuse. When the permeate storage tank is full the level switch sends the shutdown signal to the RO control panel and the system then begins it’s post-flush cycle which removes all concentrated contaminants from the system. Once complete, the system waits for the next start signal.

main features

WhatsApp
Email
Facebook
Twitter
LinkedIn


PROJECT DESCRIPTION
MOBILE RO DIALYSIS WATER TREATMENT SYSTEMS - 576 GPD

Easy to transport Mobile RO Dialysis Water treatment Unit provides the required flexibility for integration into hospital and home needs. The system it’s set to produce 0.4 US Gal/minute of product water at 20% recovery.

Water pre-treatment included. It consists of sediment and activated carbon filters to remove suspended solids and residual chlorine from incoming feed water.

 

Here more info on Dialysis RO Mobile

main features

PHYSICAL DATA & DIMENSIONS :

WhatsApp
Email
Facebook
Twitter
LinkedIn


PROJECT DESCRIPTION
CONTAINERIZED SEAWATER DESALINATION solving water for AQUACULTURE

INDUSTRIAL
AQUACULTURE
- SHRIMP FACTORY -

This project was built to deliver treated water to a Lab of Shrimp reproduction and genetic Improvement Center

Shrimp larvae laboratory

THE PROBLEM

Shortage of purified water, so well water had to be bought in tankers, and therefore increased costs in the production process. The client was looking for a way to reduce costs by optimizing their processes. The cost of water and its transfer to the plant represents a high impact in production cost.

Ultrafiltration

The solution

ARKQUA® Customer acquired two ARKQUA systems, each capable to produce 132,000 GPD (500m3d) of purified water. Each system is mounted inside a 40' container, fully automatic. Integral Clean/flush system automatically flush piping and membranes with fresh water at shutdown. This subsystem is also utilized for periodic chemical cleaning of the membranes.

Seawater Desalination Aquaculture Site

THE RESULT

Reduction of production costs by 50%, in addition the extra load driven by having to receive water distribution trucks loaded with water daily. Production time was significantly optimized, and water quality used for the development of nauplii and larvae was considerably improved. Having remote monitoring of the plant is a great benefit that allows to take proactive actions and minimized the risk of failure.

main features

ANCILLARY EQUIPMENT

PHYSICAL DATA & DIMENSIONS :

WhatsApp
Email
Facebook
Twitter
LinkedIn